Smoke detectors are essential for home safety. They can prevent a burning meal on the stove from becoming a real emergency. Smoke detectors are easy to overlook, but you must keep them in working condition, and regular testing is the best way to make sure your alarm functions properly. Here’s how to test your smoke detectors and keep your home safe.
How to test your home’s smoke detectors
Step 1: Press and hold the test button
Before you begin the test, have another person stand by in another room as far from the alarm as possible. In an emergency, you’ll need to be able to hear the alarm from anywhere in the house. On the bottom of the smoke detector, you’ll find the button. Press and hold it for a few seconds until the alarm sounds.
Step 2: Listen for the alarm
Once the alarm goes off, take note of the volume. It should be loud, high-pitched, and audible to anyone in the home. If you’ve positioned someone in another room, check with them to make sure they were able to clearly hear the alarm. If the alarm fails to go off or is too faint to hear from other points in the house, your smoke detector likely needs new batteries.
Step 3: Replace batteries if necessary, then test again
Always use fresh batteries rather than reusing old ones. Once the batteries have been changed, repeat the first step, pressing and holding the button while someone listens for the alarm in another room. If issues persist, this may be a sign that your smoke detector is defective and needs to be replaced. Even if you’re planning on selling your home in the near future, a faulty smoke detector can cause you to fail a home inspection, so don’t ignore this task.
Testing battery-powered vs. hardwired smoke detectors
While some smoke detectors are battery-powered, others are hardwired and connected to the home’s electrical grid. While this means you don’t have to worry about replacing batteries, it doesn’t take you off the hook from testing. Hardwired detectors can still malfunction, so take the same precautions to ensure that they’re working properly.
Advanced smoke detector test
In addition to the manual method, you can test the sensors using an aerosol test. There’s a smoke spray specifically designed to test smoke detectors. Simply spray it near the detector’s vents and wait for the alarm to sound. If nothing happens, the sensor might be faulty and the smoke detector needs to be replaced.
FAQ about testing smoke detectors
How often should I test my home’s smoke detectors?
The U.S. Fire Administration recommends testing your home’s smoke detectors every month to ensure proper function. The sensors on older detectors can decrease in effectiveness over time.
When should I replace the smoke detector’s batteries?
If the smoke detector isn’t working and you suspect that dead batteries are the culprit, replace them as soon as possible. Otherwise, aim to replace the batteries every six months. A handy tip is to change the batteries whenever you change your clocks for daylight savings.
Why is my smoke detector beeping when there’s no smoke?
If your alarm is beeping intermittently and there’s no clear cause, a low battery is the likely culprit. This is another telltale sign to change the batteries. In some cases, other factors like dust, steam, and insects can trigger the alarm.
How do I keep my alarm working properly?
Regular testing can catch potential issues before they become problematic. Make sure your smoke detector is clear of dust, as this can block the sensors.
How long do smoke detectors last?
Smoke detectors tend to last around 10 years. You should replace it after this duration, even if the alarm is still functioning.